March 27, 2010

5 Steps To Installing Laminate Flooring

One of the advantages of laminated floors is you can install it yourself if you are a bit convenient and good at following directions. When you purchase your flooring, it should come with installation instructions, and for the most part you should be careful to follow these. The basic installation process is simple, and takes only a few steps.

Before you start installing your laminated floors, you need to purchase it. Remember that wood grain flooring and refined patterns are more easy to install since you do not have to match the pattern as conscientiously between pieces. You will want to determine carefully to figure out how much flooring you want, and buy at least five % extra to make allowance for scraps and mistakes. Although you do not want plenty of tools, there are some especially for this job that might make it a bit less complicated that you can purchase if you'd like to.

First, you are going to need to prepare the floor. This means you would like to pull up any carpet that could be installed, and take away the baseboards, keeping an eye on which boards go where. Then you want to ensure the floor is smooth, getting rid of any staples and leveling out any places that are not already even. You also desire to be sure the floor is nice and clean.

Once the floor is prepared, you can start putting down the underlayment. You will want to use this so as to make the floor less loud. There are a bunch of different types you can select from, and you must make sure to get one that's of top quality, and not the cheapest thing you will find. Essentially you just tape the pieces of underlayment together to cover the floor.

After the underlayment is ready you can start installing the actual laminate flooring. You will want to measure and get a brilliant idea of how you're going to lay it out before you really start the installation. Many of these floors just click together, and you can hit them with a rubber mallet to make certain the pieces are stuck together well without a giant opening between them.

Once you have finished installing the laminate flooring, you can replace the baseboards that you removed in the beginning and you are all finished. Add some area rugs as accents and you are prepared to show it off to your friends!

Filed under About Flooring by Guest Author

Permalink Print Comment

Trackback URI

http://www.flooringfaq.com/blog/about-flooring/1424/5-steps-to-installing-laminate-flooring/trackback

Leave a Comment